Pentek PCF1-10MB Water Deionization Filter Cartridge, 10" x 2-1/2"
Huge Savings Item! Free Shipping Included! Save 13% on the Pentek PCF1-10MB Water Deionization Filter Cartridge, 10'' x 2-1/2'' by Pentek at Frontier Science. SKU: PENTEK-PCF1-10MB. MPN: 155273-43. Hurry! Limited time offer. Offer valid only while supplies last. This Pentek PCF1-10MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit
This Pentek PCF1-10MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deionization resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. The cartridge has a capacity of 270 grains, an initial pressure drop of 1.5 pounds per square inch (psi) at a recommended flow rate of 0.25 gallons per minute (gpm), and a temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This water deionization filter cartridge is used for the demineralization of water used in various industrial processes.
|Initial pressure drop at 0.50 gpm||1.5 psi|
|Temperature range||40 to 100 degrees F (4.4 to 37.8 degrees C)|
|Maximum dimensions (H x W)||9-3/4 x 2-2/3 inches (248 x 68 mm)|
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Features & Highlights
- Demineralizes water for medical, pharmaceutical, cosmetic, and circuit board manufacturing applications
- Mixed bed moist spherical bead deionization resin with polypropylene pre- and post-filters
- Capacity of 270 grains
- Initial pressure drop of 1.5 psi at a recommended flow rate of 0.25 gpm
- Temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C)
|Item Weight:||0.0134 pounds|
|Item Size:||2.5 x 10 x 10 inches|
|Package Weight:||1.2 pounds|
|Package Size:||3.2 x 3.2 x 3.2 inches|