Newly discovered documents reveal that in the months immediately following the purported 1947 UFO crash at
Roswell, secret government studies began on a material that was previously unknown to science. The "memory metal"
that was studied precisely matches some of the debris material reported by several witnesses to the crash. Evidence
shows that -under military direction- these unique metal studies were undertaken by a contracted laboratory that
possessed advanced technical capabilities that the U.S. government itself did not have at the time. A former high-level
scientist employed by the involved laboratory has offered a confession that he was tasked to study the crashed UFO
material. Information provided by two U.S. Air Force Generals also offers direct support for this discovery.
The documents suggest that after the crash, the US government attempted to develop a unique material that is
today referred to as memory metal. This shape-recovery alloy was reported by several witnesses to the Roswell crash
in the summer of 1947. The lightweight "morphing" material was able to be crumpled or deformed and then return
itself instantly and seamlessly to its original state. The metallurgical discoveries that resulted from these studies were
then "seeded" for further technology development to other government agencies (including NASA) and through a
series of military contracts to universities and industry.
The laboratory contracted by Wright Patterson Air Force Base to perform these studies was Battelle Memorial
Institute in Columbus, OH. It has been credibly reported that Wright Patterson Air Force Base was the very base
where the Roswell UFO debris was flown after the crash.
Roswell, secret government studies began on a material that was previously unknown to science. The "memory metal"
that was studied precisely matches some of the debris material reported by several witnesses to the crash. Evidence
shows that -under military direction- these unique metal studies were undertaken by a contracted laboratory that
possessed advanced technical capabilities that the U.S. government itself did not have at the time. A former high-level
scientist employed by the involved laboratory has offered a confession that he was tasked to study the crashed UFO
material. Information provided by two U.S. Air Force Generals also offers direct support for this discovery.
The documents suggest that after the crash, the US government attempted to develop a unique material that is
today referred to as memory metal. This shape-recovery alloy was reported by several witnesses to the Roswell crash
in the summer of 1947. The lightweight "morphing" material was able to be crumpled or deformed and then return
itself instantly and seamlessly to its original state. The metallurgical discoveries that resulted from these studies were
then "seeded" for further technology development to other government agencies (including NASA) and through a
series of military contracts to universities and industry.
The laboratory contracted by Wright Patterson Air Force Base to perform these studies was Battelle Memorial
Institute in Columbus, OH. It has been credibly reported that Wright Patterson Air Force Base was the very base
where the Roswell UFO debris was flown after the crash.
ROSWELL DEBRIS CONFIRMED AS EXTRATERRESTRIAL: LAB LOCATED, SCIENTISTS NAMED by Anthony
Bragalia
Bragalia
ADVERTISERS
ASK ABOUT
ADVERTISER RATES
AND REACH YOUR
NEW CUSTOMERS!
ASK ABOUT
ADVERTISER RATES
AND REACH YOUR
NEW CUSTOMERS!
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Part One of Tony Bragalia's probe of the Roswell incident's memory metal
| Copyright © 2009 JFS |
Recently obtained documents reveal that these studies for
Wright Patterson were conducted at Battelle under the
direction of Dr. Howard C. Cross. In the late 1940's, H.C
Cross was Battelle's expert scientist in exotic metallurgy and
Titanium alloy research.
Curiously –although he was a research metallurgist- Cross
was also Battelle’s "point person" in later studies on UFOs
that Battelle conducted in the early 1950's for the U.S. Air
Force's official UFO study, Project Bluebook. Cross is likely
an author of Project Bluebook's still-missing Report Number
13. He is also the author of a strange letter from Battelle to
Wright Patterson known as "The Pentacle" memo. Dr. Cross'
historic role will be detailed in a forthcoming article.
Founded in 1929, Battelle is engaged in research,
development and commercialization of technological
innovation. They specialize in materials science and
engineering, life sciences, energy science and national
Wright Patterson were conducted at Battelle under the
direction of Dr. Howard C. Cross. In the late 1940's, H.C
Cross was Battelle's expert scientist in exotic metallurgy and
Titanium alloy research.
Curiously –although he was a research metallurgist- Cross
was also Battelle’s "point person" in later studies on UFOs
that Battelle conducted in the early 1950's for the U.S. Air
Force's official UFO study, Project Bluebook. Cross is likely
an author of Project Bluebook's still-missing Report Number
13. He is also the author of a strange letter from Battelle to
Wright Patterson known as "The Pentacle" memo. Dr. Cross'
historic role will be detailed in a forthcoming article.
Founded in 1929, Battelle is engaged in research,
development and commercialization of technological
innovation. They specialize in materials science and
engineering, life sciences, energy science and national
The full story of the Roswell-Battelle connection is related in the newly published sequel book "Witness to Roswell "
(Revised and Expanded Edition, 2009) by Tom Carey and Don Schmitt in chapter contributions made by this author.
Scientific citations, references and report images are also included in this updated edition.
THE DEBRIS AND MEMORY METAL:
The direct connection between the Roswell debris and the Battelle studies is revealed in a material known as Nitinol.
Nitinol is a specially processed combination of Nickel and Titanium, or NiTi. It displays many of the very same
properties and physical characteristics as some of the crash debris materials that was reported at Roswell. Both are
memory metals that "remember" their original shape and both are extremely lightweight. The materials are reported
to have similar color, possess a high fatigue strength and are able to withstand extreme high heat.
Today Nitinol is incorporated in items as far-ranging as medical implants and bendable eyeglass frames. It is
produced in many forms including sheet, wire and coil. Newer "intelligent metal" systems are being studied by NASA
in the creation of bendable or flappable wings, as self-actuators and as a "self-healing" outer hull "skin" for
spacecraft. It is believed that the memory metal found at Roswell came from the outer structures of a downed
extraterrestrial spacecraft.
The earliest known combination of Titanium and Nickel reported in the scientific literature was in 1939 by two
Europeans. However, this crude sample was a "by-product" of research entirely unrelated to the study of Nitinol. Its
"memory metal" potential was not sought or noted. The scientists would have been unable to purify Titanium to
sufficient levels at that time-and they would not have known about the energy requirement needed to create the
"morphing" effect.
The next time that we see the unique combination of Titanium and Nickel emerge in science is by military scientists
associated with Naval Intelligence at the US. Naval Ordnance Lab. It was there that Nitinol was "officially" created in
the early 1960s. But Nitinol's "official" history –including the date and reasons for discovery- is conflicting. More on
this murky history will be detailed in a future article. Recently gained information suggests that it was in fact
Battelle's metallurgist and UFO researcher Dr. Howard Cross who "fed" the US Navy information (including the “phase
diagram” and details on Titanium processing) that is required to create Nitinol.
Research by this author has confirmed that Nitinol studies actually began at Battelle immediately after the Roswell
crash -and not in the early 1960s. And it was Wright Patterson (the base where the crash material was flown) that
contracted this secret work.
This confirmation is given in a brief footnote found in a study by one of Nitinol's "official" inventors at the U.S. Naval
Lab. In that military report on Nitinol, the author footnotes a 1949 Battelle study which clearly pertains to the
refinement of Titanium and Nickel. The citation relates to a "phase diagram" that examines states of matter and how
the two metals could be successfully alloyed. If processed in the right way, the result is Nitinol memory metal. It is
possible that the “official” co-inventors of Nitinol were unaware that the memory metal’s impetus was to be found in
the study of the Roswell debris- or perhaps not.
Only three other references to this Titanium and Nickel memory metal report by Battelle have ever been found. In
each case, they appear only as buried footnotes- and only in metals studies which were themselves conducted under
U.S. military auspice. In one case this included having a "Project Monitor" present from Wright Patterson Air Force
Base.
A historical analysis of the scientific literature shows that no other alloys had ever been studied by the U.S. military
as a potential "memory metal" prior to this late 1940's time frame -and Battelle's Wright Patterson study contract.
Wright Patterson needed Battelle to accomplish this work. Much of the reason for this is because Battelle had
something that Wright Patterson did not- an advanced arc furnace that was capable of melting and refining Titanium
to the purity required to make memory metal.
The history of Titanium (which is required to make Nitinol) is itself also very revealing. We learn through review of the
literature that, according to Encyclopedia Britannica: "After 1947, Titanium changed from a laboratory curiosity to an
important structural metal." According to the Industrial Arts Index, the number of science abstracts published on
Titanium spiked dramatically from 1946 (and prior years) as compared to abstracts on Titanium written after 1947.
In Rand Corporation's 1962 abstract "The Titanium Decade" we learn that: "A far larger Titanium industry arose from
the point of view of production capacity than was needed to produce the material that was actually used in aircraft.
The time period of 1948-1958 involved virtually all of the costs." An astonishing $2.5 billion (in today's dollars) was
spent on Titanium research by the US government in the years immediately following 1947.
THE SCIENTISTS AND THE REPORTS ARE IDENTIFIED
The Battelle memory metal report is titled "Second Progress Report on Contract AF33 (038)-3736" and was
completed for Wright Patterson Air Force Base in 1949. It is authored by C.M. Craighead, F. Fawn and L.W.
Eastwood. It appears to be part of a series of such contracts conducted through the early 1950s. Interestingly, the
scientists who authored the report were very closely associated with Battelle's chief Titanium metallurgist (and later,
Battelle's UFO researcher for Project Bluebook) Dr. Howard Cross, previously mentioned. The scientists went on to
author reports on exotic metallurgy that related to such areas as "metal and superplasticity," "metal transformation,"
and "metal microstructures."
Based on the sections of the studies that were found that reference this Battelle report- we know that this
“progress report” offers the first “phase diagram” ever produced to attempt to successfully alloy Titanium and Nickel.
This would be required to make memory metal. We can also infer that it examined refinement of Titanium to high
purity levels. High purity Titanium is required to create the shape-recovery effect.
No references have ever been located to something that must surely exist- Battelle's "First Progress Report" on the
memory metal. While the Second Progress Report (completed in 1949) refers to techniques to process the alloy, the
First Progress Report (authored in 1947 or 1948) probably relates to the actual analysis of "Roswellian" memory
metal.
Although Nitinol is not identical to the Roswell debris material, it represents our best attempts at re-creation of the
found memory metal. The impetus for this "shape-recovery" metallurgical research has to be the crash debris
discovered at Roswell in the summer of 1947.
THE REPORTS ARE MISSING
A year long effort was made by this author to locate Battelle's First and Second Progress Reports on memory metal.
Though footnotes have been located to the reports in military sponsored studies on memory metal, access to the
actual reports remains impossible.
Battelle's own Historian/Librarian was unable to locate the documents. In a later follow-up call to Battelle, Sarasota
Herald Tribune reporter Billy Cox was told that Battelle is still unable to find the report and that it remains a
"mystery." Likewise, Wright Patterson Air Force Base's own Archivist and Manager of its Special Collections was
unable to locate the documents. Both librarians from each organization worked together to find them. They are
baffled and suggest that it may mean that the reports were destroyed (though there is no record of this) or that
they may remain highly classified.
The U.S. DOD's Defense Technical Information Center (DTIC) is the master repository of our nation's military-
sponsored technical reports and studies. Their database also fails to locate the Battelle reports. Finally, with the
guidance of reporter Billy Cox, a Freedom of Information Act (FOIA) request to the Secretary of the Air Force/WPAFB
was filed by this author. Information has yet to be provided that is responsive to this request.
It is hoped that the Second Progress Report will one day be located. This is because if it does contain "phase
diagrams" for the alloying of Nickel and Titanium- it will confirm the work on memory metal. It would strongly suggest
that shape-recovery alloys were precisely what Battelle was attempting to create for the military in the time period
directly after the Roswell crash. The likelihood that the First Progress Report by Battelle on memory metal will ever be
found is even more remote.
CONFIRMATION BY TWO U.S. AIR FORCE GENERALS
In an interview conducted in the 1990's, former Wright-Patterson Air Force Base Brigadier General Arthur Exon
confirmed the existence of the Roswell metal reports. Exon, the Base Commander of Wright Patterson in the 1960s,
related that he was privy to some of the details on the composition of the crash debris and the variety of tests that
were performed on it. Astonishingly, Exon stated of the debris: "It was Titanium and some other metal they knew
about, and the processing was somehow different." Of course, special "processing" of Titanium and the “other metal”
that “they knew about” (Nickel) is required to create Nitinol.
Exon added tellingly, "And it wouldn't surprise me if the material wasn't still around, certainly the reports are." Exon
was likely referring to the Battelle Progress Reports on memory metal done for Wright Patterson in the late 1940's.
General Arthur Exon:
Air Force General George Schulgen (who led Intelligence at the Pentagon at the time of the Roswell incident)
authored a previously-marked “secret” draft memo on the flying saucer issue on October 30, 1947- about four
months after the crash.
In the verified version of this memo is found a section entitled "Items of Construction." Schulgen instructs his
officers to be aware of flying objects and their materials of construction. He specifically notes the "unusual fabrication
methods to achieve extreme lightweight" and that the material is of a "composite construction...using various
combinations of metals."
Schulgen is describing precisely some of the very characteristics of Nitinol. Just like the Roswell debris material, it is
an "extreme lightweight" intermetallic alloy. As a novel "composite construction," it is created by an "unusual
fabrication" method that "uses a combination of metals"- perhaps like Titanium and Nickel.
General Shulgen’s 1947 Memo
U.S. Pentagon 1947:
BATTELLE SCIENTIST CONFESSES TO UFO CRASH DEBRIS ANALYSIS
Battelle scientist Elroy John Center has stated that he analyzed metal from a crashed UFO when he was employed by
the Institute. Center was a Senior Research Chemist who worked for Battelle for nearly two decades, from 1939 to
1957. This has been confirmed by both his University of Michigan alumni files and by the location of scientific papers
that he authored during his employment while at Battelle.
A graduate Chemical Engineer, Center authored papers that appeared in highly technical journals. His areas of
research included the chemical testing of metals; the microdetermination of metals in alloys; and the spectroscopic
analysis of unique materials. Center was likely involved in early analysis of the Roswell debris. A groundbreaking
metals analysis technique that Center developed has been found cited in studies related to the “polygraphic
determination of Titanium” in alloys. Specially-selected Titanium is required to create the Roswell-like "memory metal"
Nitinol.
Center's family members confirm that he had an intense interest in UFOs and the extraterrestrial. In May of 1992,
noted historical researcher Dr. Irena Scott of Columbus, OH (herself a former Battelle scientist) interviewed a close
professional associate of Elroy Center. Elroy had privately related to him in June of 1960 that while he was employed
at Battelle he had been involved in a very strange laboratory project. Center said that earlier he had been tasked by
his superiors to assist on a highly-classified Battelle study that was contracted by the government. He said that the
project involved work on a very unusual material. Center understood that this debris material was retrieved by the
US government from the earlier crash of a UFO. Center referred to the item he studied as a "piece." He explained
that this "piece" was not something with which anyone was familiar. He also said that the debris had been inscribed
with strange symbols that he called "glyphics." Similar markings have of course been reported by some of the
witnesses to the Roswell crash debris. Center stopped short of providing any further details. The Battelle scientist
passed away in 1991.
FUTURE INFORMATION
Forthcoming details on the Battelle-Roswell Connection will document:
- Battelle metallurgist Dr. Howard Cross' other secret studies on UFO sightings and UFO debris
- The identities of Battelle's Wright Patterson "paymasters"
- Bizarre "mental influence" tests conducted on Nitinol by the US military and NASA using purported psychics to
"morph" the material with “mind energy”
- Why “morphing” may be the key to the UFO mystery
- How today's research on "intelligent metals" and "adaptable metals" is guided by NASA, the US military and Battelle
BATTELLE AND ROSWELL
The Battelle-Roswell Connection is fast becoming established. Its implications are profound. In 1947 a spacecraft not
of earth - whose materials of construction were unknown to science- fell from the sky to forever change history.
(Revised and Expanded Edition, 2009) by Tom Carey and Don Schmitt in chapter contributions made by this author.
Scientific citations, references and report images are also included in this updated edition.
THE DEBRIS AND MEMORY METAL:
The direct connection between the Roswell debris and the Battelle studies is revealed in a material known as Nitinol.
Nitinol is a specially processed combination of Nickel and Titanium, or NiTi. It displays many of the very same
properties and physical characteristics as some of the crash debris materials that was reported at Roswell. Both are
memory metals that "remember" their original shape and both are extremely lightweight. The materials are reported
to have similar color, possess a high fatigue strength and are able to withstand extreme high heat.
Today Nitinol is incorporated in items as far-ranging as medical implants and bendable eyeglass frames. It is
produced in many forms including sheet, wire and coil. Newer "intelligent metal" systems are being studied by NASA
in the creation of bendable or flappable wings, as self-actuators and as a "self-healing" outer hull "skin" for
spacecraft. It is believed that the memory metal found at Roswell came from the outer structures of a downed
extraterrestrial spacecraft.
The earliest known combination of Titanium and Nickel reported in the scientific literature was in 1939 by two
Europeans. However, this crude sample was a "by-product" of research entirely unrelated to the study of Nitinol. Its
"memory metal" potential was not sought or noted. The scientists would have been unable to purify Titanium to
sufficient levels at that time-and they would not have known about the energy requirement needed to create the
"morphing" effect.
The next time that we see the unique combination of Titanium and Nickel emerge in science is by military scientists
associated with Naval Intelligence at the US. Naval Ordnance Lab. It was there that Nitinol was "officially" created in
the early 1960s. But Nitinol's "official" history –including the date and reasons for discovery- is conflicting. More on
this murky history will be detailed in a future article. Recently gained information suggests that it was in fact
Battelle's metallurgist and UFO researcher Dr. Howard Cross who "fed" the US Navy information (including the “phase
diagram” and details on Titanium processing) that is required to create Nitinol.
Research by this author has confirmed that Nitinol studies actually began at Battelle immediately after the Roswell
crash -and not in the early 1960s. And it was Wright Patterson (the base where the crash material was flown) that
contracted this secret work.
This confirmation is given in a brief footnote found in a study by one of Nitinol's "official" inventors at the U.S. Naval
Lab. In that military report on Nitinol, the author footnotes a 1949 Battelle study which clearly pertains to the
refinement of Titanium and Nickel. The citation relates to a "phase diagram" that examines states of matter and how
the two metals could be successfully alloyed. If processed in the right way, the result is Nitinol memory metal. It is
possible that the “official” co-inventors of Nitinol were unaware that the memory metal’s impetus was to be found in
the study of the Roswell debris- or perhaps not.
Only three other references to this Titanium and Nickel memory metal report by Battelle have ever been found. In
each case, they appear only as buried footnotes- and only in metals studies which were themselves conducted under
U.S. military auspice. In one case this included having a "Project Monitor" present from Wright Patterson Air Force
Base.
A historical analysis of the scientific literature shows that no other alloys had ever been studied by the U.S. military
as a potential "memory metal" prior to this late 1940's time frame -and Battelle's Wright Patterson study contract.
Wright Patterson needed Battelle to accomplish this work. Much of the reason for this is because Battelle had
something that Wright Patterson did not- an advanced arc furnace that was capable of melting and refining Titanium
to the purity required to make memory metal.
The history of Titanium (which is required to make Nitinol) is itself also very revealing. We learn through review of the
literature that, according to Encyclopedia Britannica: "After 1947, Titanium changed from a laboratory curiosity to an
important structural metal." According to the Industrial Arts Index, the number of science abstracts published on
Titanium spiked dramatically from 1946 (and prior years) as compared to abstracts on Titanium written after 1947.
In Rand Corporation's 1962 abstract "The Titanium Decade" we learn that: "A far larger Titanium industry arose from
the point of view of production capacity than was needed to produce the material that was actually used in aircraft.
The time period of 1948-1958 involved virtually all of the costs." An astonishing $2.5 billion (in today's dollars) was
spent on Titanium research by the US government in the years immediately following 1947.
THE SCIENTISTS AND THE REPORTS ARE IDENTIFIED
The Battelle memory metal report is titled "Second Progress Report on Contract AF33 (038)-3736" and was
completed for Wright Patterson Air Force Base in 1949. It is authored by C.M. Craighead, F. Fawn and L.W.
Eastwood. It appears to be part of a series of such contracts conducted through the early 1950s. Interestingly, the
scientists who authored the report were very closely associated with Battelle's chief Titanium metallurgist (and later,
Battelle's UFO researcher for Project Bluebook) Dr. Howard Cross, previously mentioned. The scientists went on to
author reports on exotic metallurgy that related to such areas as "metal and superplasticity," "metal transformation,"
and "metal microstructures."
Based on the sections of the studies that were found that reference this Battelle report- we know that this
“progress report” offers the first “phase diagram” ever produced to attempt to successfully alloy Titanium and Nickel.
This would be required to make memory metal. We can also infer that it examined refinement of Titanium to high
purity levels. High purity Titanium is required to create the shape-recovery effect.
No references have ever been located to something that must surely exist- Battelle's "First Progress Report" on the
memory metal. While the Second Progress Report (completed in 1949) refers to techniques to process the alloy, the
First Progress Report (authored in 1947 or 1948) probably relates to the actual analysis of "Roswellian" memory
metal.
Although Nitinol is not identical to the Roswell debris material, it represents our best attempts at re-creation of the
found memory metal. The impetus for this "shape-recovery" metallurgical research has to be the crash debris
discovered at Roswell in the summer of 1947.
THE REPORTS ARE MISSING
A year long effort was made by this author to locate Battelle's First and Second Progress Reports on memory metal.
Though footnotes have been located to the reports in military sponsored studies on memory metal, access to the
actual reports remains impossible.
Battelle's own Historian/Librarian was unable to locate the documents. In a later follow-up call to Battelle, Sarasota
Herald Tribune reporter Billy Cox was told that Battelle is still unable to find the report and that it remains a
"mystery." Likewise, Wright Patterson Air Force Base's own Archivist and Manager of its Special Collections was
unable to locate the documents. Both librarians from each organization worked together to find them. They are
baffled and suggest that it may mean that the reports were destroyed (though there is no record of this) or that
they may remain highly classified.
The U.S. DOD's Defense Technical Information Center (DTIC) is the master repository of our nation's military-
sponsored technical reports and studies. Their database also fails to locate the Battelle reports. Finally, with the
guidance of reporter Billy Cox, a Freedom of Information Act (FOIA) request to the Secretary of the Air Force/WPAFB
was filed by this author. Information has yet to be provided that is responsive to this request.
It is hoped that the Second Progress Report will one day be located. This is because if it does contain "phase
diagrams" for the alloying of Nickel and Titanium- it will confirm the work on memory metal. It would strongly suggest
that shape-recovery alloys were precisely what Battelle was attempting to create for the military in the time period
directly after the Roswell crash. The likelihood that the First Progress Report by Battelle on memory metal will ever be
found is even more remote.
CONFIRMATION BY TWO U.S. AIR FORCE GENERALS
In an interview conducted in the 1990's, former Wright-Patterson Air Force Base Brigadier General Arthur Exon
confirmed the existence of the Roswell metal reports. Exon, the Base Commander of Wright Patterson in the 1960s,
related that he was privy to some of the details on the composition of the crash debris and the variety of tests that
were performed on it. Astonishingly, Exon stated of the debris: "It was Titanium and some other metal they knew
about, and the processing was somehow different." Of course, special "processing" of Titanium and the “other metal”
that “they knew about” (Nickel) is required to create Nitinol.
Exon added tellingly, "And it wouldn't surprise me if the material wasn't still around, certainly the reports are." Exon
was likely referring to the Battelle Progress Reports on memory metal done for Wright Patterson in the late 1940's.
General Arthur Exon:
Air Force General George Schulgen (who led Intelligence at the Pentagon at the time of the Roswell incident)
authored a previously-marked “secret” draft memo on the flying saucer issue on October 30, 1947- about four
months after the crash.
In the verified version of this memo is found a section entitled "Items of Construction." Schulgen instructs his
officers to be aware of flying objects and their materials of construction. He specifically notes the "unusual fabrication
methods to achieve extreme lightweight" and that the material is of a "composite construction...using various
combinations of metals."
Schulgen is describing precisely some of the very characteristics of Nitinol. Just like the Roswell debris material, it is
an "extreme lightweight" intermetallic alloy. As a novel "composite construction," it is created by an "unusual
fabrication" method that "uses a combination of metals"- perhaps like Titanium and Nickel.
General Shulgen’s 1947 Memo
U.S. Pentagon 1947:
BATTELLE SCIENTIST CONFESSES TO UFO CRASH DEBRIS ANALYSIS
Battelle scientist Elroy John Center has stated that he analyzed metal from a crashed UFO when he was employed by
the Institute. Center was a Senior Research Chemist who worked for Battelle for nearly two decades, from 1939 to
1957. This has been confirmed by both his University of Michigan alumni files and by the location of scientific papers
that he authored during his employment while at Battelle.
A graduate Chemical Engineer, Center authored papers that appeared in highly technical journals. His areas of
research included the chemical testing of metals; the microdetermination of metals in alloys; and the spectroscopic
analysis of unique materials. Center was likely involved in early analysis of the Roswell debris. A groundbreaking
metals analysis technique that Center developed has been found cited in studies related to the “polygraphic
determination of Titanium” in alloys. Specially-selected Titanium is required to create the Roswell-like "memory metal"
Nitinol.
Center's family members confirm that he had an intense interest in UFOs and the extraterrestrial. In May of 1992,
noted historical researcher Dr. Irena Scott of Columbus, OH (herself a former Battelle scientist) interviewed a close
professional associate of Elroy Center. Elroy had privately related to him in June of 1960 that while he was employed
at Battelle he had been involved in a very strange laboratory project. Center said that earlier he had been tasked by
his superiors to assist on a highly-classified Battelle study that was contracted by the government. He said that the
project involved work on a very unusual material. Center understood that this debris material was retrieved by the
US government from the earlier crash of a UFO. Center referred to the item he studied as a "piece." He explained
that this "piece" was not something with which anyone was familiar. He also said that the debris had been inscribed
with strange symbols that he called "glyphics." Similar markings have of course been reported by some of the
witnesses to the Roswell crash debris. Center stopped short of providing any further details. The Battelle scientist
passed away in 1991.
FUTURE INFORMATION
Forthcoming details on the Battelle-Roswell Connection will document:
- Battelle metallurgist Dr. Howard Cross' other secret studies on UFO sightings and UFO debris
- The identities of Battelle's Wright Patterson "paymasters"
- Bizarre "mental influence" tests conducted on Nitinol by the US military and NASA using purported psychics to
"morph" the material with “mind energy”
- Why “morphing” may be the key to the UFO mystery
- How today's research on "intelligent metals" and "adaptable metals" is guided by NASA, the US military and Battelle
BATTELLE AND ROSWELL
The Battelle-Roswell Connection is fast becoming established. Its implications are profound. In 1947 a spacecraft not
of earth - whose materials of construction were unknown to science- fell from the sky to forever change history.
| TODAY IS |
